Gel Earthing Electrodes-50x3- Copper

Gel Earthing Electrodes
50x3-Copper

3E Solutions is Gel Earthing Electrodes manufacturer in Jaipur and supply and install in Jaipur and all over Rajasthan. Our Gel Earthing Electrodes have been used by premium customers at Jaipur who seek the product with best quality and performance.

Gel Earthing Electrodes Price Copper-50×3 : Rs 4400/ 

Product Specifications:

Specifications of Gel Earthing Electrodes Copper 50×3 are as follows: 

1. Outer Pipe Length : 3 meter / 10 Feet : GI Pipe

2. Outer Diameter : 56 mm : Thickness: 2.0 mm

3. Terminal – 40×5 mm Copper

4. Primary Conductor : Copper 25×3  mm strip

5 Material between Primary and secondary conductor – Conductive Bentonite Based.

6. Backfill Compound – 2 Bags of 22 Kg each included.

3E Solutions provide best Gel Earthing Electrodes or GI Chemical Earthing Electrode in Jaipur and all over Rajasthan , which has long life, superior electrical performance and thermal properties.

Gel Earthing Electrodes-Commercial Terms and Conditions

1. Prices shall be finalised after knowing the final destination, Quanity and application of the use of the gel earthing electrodes.

2. The Prices, wherever quoted are exclusive of the Taxes / GST. 

3. Freight- Extra as actual

4. Delivery : 140 Pcs per week. The final delivery will be informed in offer only.

5. Payment Terms : 100 % Advance (Upto 140 Pcs). For more, 30% Advance and balance including taxes and transportation, before dispatch against PI.

6. Installation: Only upon confirmation by Labour supplier. Excluded in offer in general. Installation instruction on risks, safety, availability of water as laid in here below to be strictly adhared. We provide Gel  Earthing Electrodes installation service in Jaipur and all over Rajasthan including Ajmer, Kishangarh, Neemrana, Bhiwadi and Jodhpur.

Gel Earthing Electrodes Installation Instructions

1. Pl premix the backfill compound with water before filling in the augured hole of size not below 8 inch. 

2. Cordinate with site owner/ site incharge for avoiding damage of Telecom/LT/HT electrical cables/Fibre optic lines/ sewerage / water etc lines

3. Minimum interfering hemisphere of – 2 meter ( pref equal to length of pipe ) shd be mother earth all around the pipe for better results. Maintain safe distance from sewerage line / basement and try to avoid loose soil ( refilled ) .

4. The manual digging work is job of unskilled labour. In factory premises where there is risk of high voltage, chemicals, explosives etc, the earthing installation work must be supervised by customer side safety incharge.

Safety - Precautions

1. Ensure no electrical, water , telecom or sewerage line below the site given for excavation. The manual work by labour to dig the hole involve sharp tools which may cut the cables and damage the pipe lines which may harm or cause civil liability. 

2 Ensure availability of water at the site required for premixing.

3. Pl inform if the mother soil is not available without using machine work like in the case of road, RCC or Pucca floor where we want to install the earthing.

 

× How can I help you?